Plastic Media for Vibratory Finishing and Deburring

Plastic Media for Vibratory Finishing and Deburring

SKU: GIANT-PLASTIC Category: Tag:

Description

Plastic Finishing Media and Deburring Media

Plastic deburring media is available in low density, high density and high performance formulations to meet the needs of specific applications and a variety of finishes. All formulations ensure extended life, consistency of performance and reduced effluent, conforming to environmental and ecological standards. These are the most effective media for any vibratory finishing or deburring machines.

Low density – General purpose medias can be used for deburring, flash removal, burnishing and pre-plate finishing.

High density – Media that has been designed for superior cut and stock removal on both ferrous and non-ferrous metals. In most instances, these high density medias will reduce cycle times and provide vastly improved finishes in applications ranging from deburring of hard metals to fine finished on intricate parts.

High Performance – Media that has been formulated for use in specific applications involving ferrous metals.

These vibratory finishing media types will provide a dramatic improvement in surface finished with the impact resistance of a plastic body, which significantly decreases fracturing and impingement.

Vibra Finish V

65-70 lb/ cu ft, Light Green color.

PREPLATE: A light weight media that produces a very smooth finish. An excellent preplate finish and long wearing.

Vibra Finish X

65-70 lb/cu ft, Dark Green color.

GENERAL PURPOSE: This formulation is used in most standard applications. Great metal removal with a minimum of media loss.

Vibra Finish XV

65-70 lb/cu ft, Blue color.

FAST CUT: A fast cutting media that leaves excellent finishes ready for anodizing or painting.

Vibra Finish Z1

90-95 lb.cu ft, Tan color.

FAST CUT: Heavy zircon molded media, a general purpose, fast cutting media with good wear designed to produce excellent finishes with reduced cycle times.

Washington Mills Media

These vibratory medias can be used for deburring, flash removal, burnishing and pre-plate finishing.

DPLD-10

68 lb/cu ft, Blue color.

Very mild cutting action producing a low-micro-inch pre-plate finish. Can be used for surface preparation of parts which require buffing, burnishing or plating. Provides a smooth, clean and reflective finish.

DPLD-20

75 lb/cu ft, Green color.

A media which gives a medium cut while producing a low micro-inch finish. Use for surface preparation on parts requiring plating, buffing or burnishing. Will usually eliminate a two (2) step process.

DPLD-30

75 lb/cu ft, Maroon color.

A faster cutting media which provides a very bright low micro-inch finish. Eliminates two-step operations where surface removal, buffing or plating of parts is required.

DPLD-40

68 lb/cu ft, Green color.

A fast cutting media which provides a smooth matte finish. Removes burrs, flash, die marks and blends parting lines easily. A general purpose media for all ferrous and non-ferrous metals.

High Density Media

High density DURAMEDIA® Plastic medias are designed for superior cut and stock removal on both ferrous and non-ferrous metals. In most instances, these high density medias will reduce cycle times and provide vastly improved finishes in applications ranging from deburring of hard metals to fine finished on intricate parts.

DPHD-110

80 lb/cu ft, Yellow color.

A mild butting media which produces a very bright pre-plate finish. Use on ferrous and non-ferrous metals which require plating or where burnishing is necessary.

DPHD-120

85 lb/cu ft, Dark Yellow color.

A media which provides a more aggressive cut while producing a bright, smooth, low micro-inch finish. Use to provide a pre-plate finish on all ferrous and non-ferrous metals.

DPHD-130

88 lb/cu ft, Light Blue color.

A fast-cutting media which provides a low matte finish. Use for deburring and surface metal removal on ferrous and non-ferrous metals. Reduces cycle times and gives a pre-plate finish.

DPHD-140

90 lb/cu ft, Light Gray color.

An extremely fast cutting media which provides a smooth matte finish. Use when removing surface imperfections or for forming a radius on parts. Blends sharp edges and parting lines.

High Performance Media

High performance DURAMEDIA® Plastic medias have been formulated for use in specific applications involving ferrous metals. These metals will provide a dramatic improvement in surface finished with the impact resistance of a plastic body, which significantly decreases fracturing and impingement.

DPHP-220FC

75 lb/cu ft, White color.

Fast cutting for producing a clean, bright, matte finish. Use for deburring and surface metal removal on all metals.

DPHP-230FC

77 lb/cu ft, Brown color.

Aggressively fast cut for increased production while reducing cycle time. Ideal for removing machine lines and forming radius on hard metals.

DPHP-250FC

78 lb/cu ft, Dark Blue color.

Most aggressive cutting media. Deburring and surface removal on all ferrous metals. Suited for applications where parts are to be welded or braised.

DPHP-310MC

60 lb/cu ft, Black color.

Non-aggressive media, very minimal cut. Produces a matte finish with virtually no stock removal. Ideal for use in chemical accelerant’s and as a driver for loose abrasives.

DPHP-320MC

60 lb/cu ft, Dark Brown color.

A mild cutting media which produces a very low micro-inch finish. Use on ferrous metals requiring extremely low micro-inch finishes where plating is not required.

DPHP-350MC

60 lb/cu ft, Gray color.

Mild cutting action which produces an extremely low micro-inch finish. Use primarily on ferrous metals which require an extremely fine finish and will be plated, welded or braised.