Abrasive Blasting Media

Aluminum Oxide White

Aluminum Oxide

50, 55 lb. Bags

  • Aluminum Oxide is manufactured in an electric arc furnace that produces an extremely tough, long‐lasting grain which is graded to exacting size standards.
  • It may be repeatedly recirculated and is chemically stable and not affected by alkalis, acids or harmful to the atmosphere.
  • Suitable for wet or dry surface preparation, cleaning, deburring and cutting of various metals, ceramics, glass, wood, rubber, plastic, stone and composite materials.

MSDS TDS Blastox TDS Request Quote


Brown Aluminum Oxide

Brown Aluminum Oxide

50 lb. Bags

  • Etching applications
  • Recyclable
  • Maximum resistance to breakdown
  • Less than 1% free silica
  • Low iron content
  • Non-skid floor coating applications

MSDS TDS Request Quote


Crushed Glass

Crushed Glass

50, 3000 lb. Bags

  • An option for replacing heavily OSHA regulated silica sand for media blasting on construction sites.
  • Allows a contractor to use a CARB certified, chemically stable, and inert media to remove paint and powder coating.
  • If properly used, mild enough to use around environmentally sensitive areas, and delicate jobs.
  • Restoration of wood, and thin metal surfaces.
  • Works well in water injected abrasive blasting equipment. Rust inhibitor recommended for steel.

MSDS TDS Request Quote


Garnet

Garnet for Sandblasting

50, 55, 2200, 4000 lb. bags

  • Recyclable media for reclaim equipment (in blast cabinets and blast rooms).
  • Environmentally safe, chemically inert, no ferrous or residues.
  • Cleans efficiently without significantly metal removal.
  • Proper use of media, permits sheening of aluminum and stainless steel.
  • Removes paint and other light coatings.

MSDS TDS Request Quote


Glass Beads

Glass Beads for Sandblasting

50 lb. Bags

  • Recyclable media for reclaim equipment (cabinet use).
  • Environmentally safe, chemically inert, no ferrous or residues.
  • Cleans efficiently without significantly metal removal.
  • Proper use of media, permits sheening of aluminum and stainless steel.
  • Removes paint and other light coatings.

MSDS TDS Request Quote


Green Diamond Nickel Slag

Green Diamond Nickel Slag for Sandblasting

50, 100, 300, 4000 lb. Bags

  • Cost-effective
  • No respirable free silica
  • Controlled profile
  • Consistency from a single source in the USA
  • Cleanliness & low dusting

MSDS TDS Request Quote


Kleen Blast Copper Slag

Kleen Blast Copper Slag

50, 100, 4000 lb. Bags

  • Concrete & structural steel
  • Mohs hardness of approximately 7.5 – 8.0
  • Environmentally safe
  • Removal of mill scale
  • Applications: general purpose
  • Water quenched slag abrasive
  • Low dust, silica-free (0.01)

MSDS TDS Request Quote


Sand Lapis Lustre

Lapis Lustre Sand for Sandblasting

50, 100, 4000 lb. Bags

  • Washed
  • Graded
  • Dried
  • Certain products are packaged to ensure quality and are tested to be compliant with California ARB Certification standards and NSF 61 Standards.

MSDS TDS Request Quote


Steel Shot & Grit

Steel Shot & Grit for Sandblasting

50 lb. Bags, 1500 lb. Drum, 4000 lb. Drum

  • Blast Cleaning
  • Peening – Improve Fatigue Life = Strength
  • Non-blasting applications

MSDS TDS Request Quote


Walnut Shell (Fine)

Walnut Shell for Sandblasting

50 lb. bags

  • Preserves base, primer & gel-coats while removing top coats of paint
  • Helpful when doing wood restoration
  • Non-toxic; causes no health or environmental hazards
  • Biodegradable
  • Selective coatings removal
  • A replacement for sandblasting with sand for some projects

MSDS TDS Request Quote

Get News from Raptor Blaster

Call Now
Directions